Viessmann 7179114 Sensor
Maintain precise temperature modulation in your hydronic system with the Viessmann 7179114 Sensor #5. Specifically engineered as a DHW Immersion NTC Sensor, this genuine OEM component provides critical feedback to the boiler control unit for domestic hot water production. Designed for high-accuracy thermal monitoring, it utilizes a 10k Ohm NTC thermistor curve to ensure the burner fires only when necessary, maximizing fuel efficiency and preventing set-point overshooting.
Built for the rigors of commercial and residential mechanical rooms, the 7179114 temperature sensor features a corrosion-resistant immersion probe that handles consistent thermal cycling without signal drift. It is a direct fit for Viessmann Vitodens 100-W and 200-W series boilers, including B1HA, B1KA, and B2HA models. Whether you are troubleshooting a lack of hot water or performing a preventative maintenance overhaul, using OEM Viessmann replacement parts is essential for maintaining the safety certifications and operational integrity of the heating plant.
Key Benefits for Contractors:- Direct OEM Compatibility: Verified for use in Vitodens 100-W (B1HA, B1KA) and 200-W (B2HA 19, 28, 35) condensing boilers.
- Precise Thermal Feedback: The negative temperature coefficient (NTC) design provides rapid response times to domestic hot water demand.
- Durable Immersion Probe: Engineered to withstand mineral buildup and electrochemical corrosion within DHW tanks and heat exchangers.
- Standardized Resistance: Calibrated to 10k Ohms at 77°F (25°C) for seamless integration with Viessmann control logic.
Is this sensor compatible with the Vitodens 200 WB2B series?
Yes, the 7179114 is the designated Sensor #5 for Viessmann Vitodens 200 WB2B models as well as the newer B2HA series for monitoring indirect-fired DHW tanks.
What are the symptoms of a failing DHW NTC sensor?
Technicians often encounter intermittent burner ignition, "tap" icons appearing without flame, or domestic hot water not reaching the programmed set-point. Resistance testing with a multimeter across the terminals should correspond to the manufacturer’s NTC 10k ohm chart.
Does this include the retaining clip or sensor well?
This part number refers to the immersion sensor #5 itself. We recommend inspecting the existing clip and well for corrosion or pitting during replacement and applying thermal paste where specified by the service manual.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Viessmann 7179114 Sensor
Maintain precise temperature modulation in your hydronic system with the Viessmann 7179114 Sensor #5. Specifically engineered as a DHW Immersion NTC Sensor, this genuine OEM component provides critical feedback to the boiler control unit for domestic hot water production. Designed for high-accuracy thermal monitoring, it utilizes a 10k Ohm NTC thermistor curve to ensure the burner fires only when necessary, maximizing fuel efficiency and preventing set-point overshooting.
Built for the rigors of commercial and residential mechanical rooms, the 7179114 temperature sensor features a corrosion-resistant immersion probe that handles consistent thermal cycling without signal drift. It is a direct fit for Viessmann Vitodens 100-W and 200-W series boilers, including B1HA, B1KA, and B2HA models. Whether you are troubleshooting a lack of hot water or performing a preventative maintenance overhaul, using OEM Viessmann replacement parts is essential for maintaining the safety certifications and operational integrity of the heating plant.
Key Benefits for Contractors:- Direct OEM Compatibility: Verified for use in Vitodens 100-W (B1HA, B1KA) and 200-W (B2HA 19, 28, 35) condensing boilers.
- Precise Thermal Feedback: The negative temperature coefficient (NTC) design provides rapid response times to domestic hot water demand.
- Durable Immersion Probe: Engineered to withstand mineral buildup and electrochemical corrosion within DHW tanks and heat exchangers.
- Standardized Resistance: Calibrated to 10k Ohms at 77°F (25°C) for seamless integration with Viessmann control logic.
Is this sensor compatible with the Vitodens 200 WB2B series?
Yes, the 7179114 is the designated Sensor #5 for Viessmann Vitodens 200 WB2B models as well as the newer B2HA series for monitoring indirect-fired DHW tanks.
What are the symptoms of a failing DHW NTC sensor?
Technicians often encounter intermittent burner ignition, "tap" icons appearing without flame, or domestic hot water not reaching the programmed set-point. Resistance testing with a multimeter across the terminals should correspond to the manufacturer’s NTC 10k ohm chart.
Does this include the retaining clip or sensor well?
This part number refers to the immersion sensor #5 itself. We recommend inspecting the existing clip and well for corrosion or pitting during replacement and applying thermal paste where specified by the service manual.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Maintain precise temperature modulation in your hydronic system with the Viessmann 7179114 Sensor #5. Specifically engineered as a DHW Immersion NTC Sensor, this genuine OEM component provides critical feedback to the boiler control unit for domestic hot water production. Designed for high-accuracy thermal monitoring, it utilizes a 10k Ohm NTC thermistor curve to ensure the burner fires only when necessary, maximizing fuel efficiency and preventing set-point overshooting.
Built for the rigors of commercial and residential mechanical rooms, the 7179114 temperature sensor features a corrosion-resistant immersion probe that handles consistent thermal cycling without signal drift. It is a direct fit for Viessmann Vitodens 100-W and 200-W series boilers, including B1HA, B1KA, and B2HA models. Whether you are troubleshooting a lack of hot water or performing a preventative maintenance overhaul, using OEM Viessmann replacement parts is essential for maintaining the safety certifications and operational integrity of the heating plant.
Key Benefits for Contractors:- Direct OEM Compatibility: Verified for use in Vitodens 100-W (B1HA, B1KA) and 200-W (B2HA 19, 28, 35) condensing boilers.
- Precise Thermal Feedback: The negative temperature coefficient (NTC) design provides rapid response times to domestic hot water demand.
- Durable Immersion Probe: Engineered to withstand mineral buildup and electrochemical corrosion within DHW tanks and heat exchangers.
- Standardized Resistance: Calibrated to 10k Ohms at 77°F (25°C) for seamless integration with Viessmann control logic.
Is this sensor compatible with the Vitodens 200 WB2B series?
Yes, the 7179114 is the designated Sensor #5 for Viessmann Vitodens 200 WB2B models as well as the newer B2HA series for monitoring indirect-fired DHW tanks.
What are the symptoms of a failing DHW NTC sensor?
Technicians often encounter intermittent burner ignition, "tap" icons appearing without flame, or domestic hot water not reaching the programmed set-point. Resistance testing with a multimeter across the terminals should correspond to the manufacturer’s NTC 10k ohm chart.
Does this include the retaining clip or sensor well?
This part number refers to the immersion sensor #5 itself. We recommend inspecting the existing clip and well for corrosion or pitting during replacement and applying thermal paste where specified by the service manual.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
