Heil Quaker ICP 1175973 Sensor
The Heil Quaker ICP 1175973 Sensor Asy Flame is a critical OEM replacement component designed for precise flame rectification in residential and light commercial HVAC systems. This furnace flame sensor is engineered to withstand extreme combustion environments, featuring a high-temperature rod that monitors the burner for consistent ignition. As a genuine ICP 1175973 flame sensor, it ensures seamless integration with a wide range of International Comfort Products equipment, including brands like Tempstar, Arcoaire, Comfortmaker, and Day & Night. When a sensor fails due to soot accumulation or ceramic insulation cracks, it leads to nuisance furnace short cycling or furnace ignition failure, causing the control board to initiate a lockout for safety. Replacing a worn element with this HVAC flame monitoring assembly restores reliable system operation and prevents unburned gas from entering the heat exchanger. This flame sensor replacement is a standard truck-stock item for contractors maintaining furnaces with intermittent pilot or direct spark ignition systems.
Key Benefits:- OEM-Grade Construction: Built to exact manufacturer specifications for ICP, Heil, and Quaker heating platforms.
- Enhanced Safety: Facilitates rapid flame detection to ensure the gas valve closes instantly if combustion is not verified.
- High-Temperature Durability: The sensor rod is designed to resist oxidation and thermal stress during long heating cycles.
- Direct Technical Fit: Minimizes field modification time with a standard mounting flange and 1/4 inch male spade terminal.
- What are the signs of a bad ICP 1175973 sensor? Typical symptoms include the furnace lighting for a few seconds before shutting down, repeated ignition attempts, and furnace lockout codes on the integrated control board.
- Can I clean this sensor instead of replacing it? While technicians often use a fine abrasive to remove oxidation for temporary relief, pitted or cracked porcelain insulation requires a full ICP 1175973 replacement to ensure reliable operation.
- Which furnace models use the 1175973 flame sensor? This assembly fits various Heil, Tempstar, and Arcoaire gas furnaces; always verify the part number against the factory service manual or existing sensor profile.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $14.74
-65%$14.74
$5.16Heil Quaker ICP 1175973 Sensor
The Heil Quaker ICP 1175973 Sensor Asy Flame is a critical OEM replacement component designed for precise flame rectification in residential and light commercial HVAC systems. This furnace flame sensor is engineered to withstand extreme combustion environments, featuring a high-temperature rod that monitors the burner for consistent ignition. As a genuine ICP 1175973 flame sensor, it ensures seamless integration with a wide range of International Comfort Products equipment, including brands like Tempstar, Arcoaire, Comfortmaker, and Day & Night. When a sensor fails due to soot accumulation or ceramic insulation cracks, it leads to nuisance furnace short cycling or furnace ignition failure, causing the control board to initiate a lockout for safety. Replacing a worn element with this HVAC flame monitoring assembly restores reliable system operation and prevents unburned gas from entering the heat exchanger. This flame sensor replacement is a standard truck-stock item for contractors maintaining furnaces with intermittent pilot or direct spark ignition systems.
Key Benefits:- OEM-Grade Construction: Built to exact manufacturer specifications for ICP, Heil, and Quaker heating platforms.
- Enhanced Safety: Facilitates rapid flame detection to ensure the gas valve closes instantly if combustion is not verified.
- High-Temperature Durability: The sensor rod is designed to resist oxidation and thermal stress during long heating cycles.
- Direct Technical Fit: Minimizes field modification time with a standard mounting flange and 1/4 inch male spade terminal.
- What are the signs of a bad ICP 1175973 sensor? Typical symptoms include the furnace lighting for a few seconds before shutting down, repeated ignition attempts, and furnace lockout codes on the integrated control board.
- Can I clean this sensor instead of replacing it? While technicians often use a fine abrasive to remove oxidation for temporary relief, pitted or cracked porcelain insulation requires a full ICP 1175973 replacement to ensure reliable operation.
- Which furnace models use the 1175973 flame sensor? This assembly fits various Heil, Tempstar, and Arcoaire gas furnaces; always verify the part number against the factory service manual or existing sensor profile.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1175973 Sensor Asy Flame is a critical OEM replacement component designed for precise flame rectification in residential and light commercial HVAC systems. This furnace flame sensor is engineered to withstand extreme combustion environments, featuring a high-temperature rod that monitors the burner for consistent ignition. As a genuine ICP 1175973 flame sensor, it ensures seamless integration with a wide range of International Comfort Products equipment, including brands like Tempstar, Arcoaire, Comfortmaker, and Day & Night. When a sensor fails due to soot accumulation or ceramic insulation cracks, it leads to nuisance furnace short cycling or furnace ignition failure, causing the control board to initiate a lockout for safety. Replacing a worn element with this HVAC flame monitoring assembly restores reliable system operation and prevents unburned gas from entering the heat exchanger. This flame sensor replacement is a standard truck-stock item for contractors maintaining furnaces with intermittent pilot or direct spark ignition systems.
Key Benefits:- OEM-Grade Construction: Built to exact manufacturer specifications for ICP, Heil, and Quaker heating platforms.
- Enhanced Safety: Facilitates rapid flame detection to ensure the gas valve closes instantly if combustion is not verified.
- High-Temperature Durability: The sensor rod is designed to resist oxidation and thermal stress during long heating cycles.
- Direct Technical Fit: Minimizes field modification time with a standard mounting flange and 1/4 inch male spade terminal.
- What are the signs of a bad ICP 1175973 sensor? Typical symptoms include the furnace lighting for a few seconds before shutting down, repeated ignition attempts, and furnace lockout codes on the integrated control board.
- Can I clean this sensor instead of replacing it? While technicians often use a fine abrasive to remove oxidation for temporary relief, pitted or cracked porcelain insulation requires a full ICP 1175973 replacement to ensure reliable operation.
- Which furnace models use the 1175973 flame sensor? This assembly fits various Heil, Tempstar, and Arcoaire gas furnaces; always verify the part number against the factory service manual or existing sensor profile.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
